2 投票數 (5.00 平均) 和 419 浏览  

Douglas DC-3 (N130Q) - Greenville is a town located in Piscataquis County, in the US state of Maine. It's situated at the southern end of Moosehead Lake, the largest lake in the state. Greenville is known for its scenic beauty and outdoor recreational opportunities, such as fishing, hunting, hiking, and wildlife watching...but did you know it's also home to an incredible one of a kind example of the iconic DC-3? Don't feel bad if you answered no - most don't.br /During World War II, the US military needed an aircraft that could operate in a variety of environments, including areas without established airfields. In response to this need, the Edo Corporation designed and built a pair of twin, 1-ton floats that could be attached to a C-47. Each float was 42 feet long, five feet, eight inches wide, almost six feet high, and displaced 29,000 pounds of water. The cellular construction of each float had 14 separate water-tight compartments, and each float also had a 325 gallon fuel tank. The floats had fully retractable, hydraulic wheels, and could land on water, snow or land. The float rudders were connected to the air rudder, which allowed for control of the aircraft while in flight.br /The DC-3A on floats located in Greenville, Maine is a rare example of this technology. The aircraft, which is registered as N130Q, was delivered to the US Army Air Forces in July of 1943 as a Douglas C-53D Skytrooper and served in a variety of roles before being converted back to a DC-3A standard and more notably, to a float plane by Dick Folsom in 1976. The floats used on the aircraft are the original Edo Corporation type, and the aircraft is believed to be the only Gooney Bird on floats left in existence.br /While the floats allowed the DC-3 to operate in areas without established airfields, they also created a significant amount of drag and reduced the aircraft's speed. As a result, the aircraft was about 30 mph slower than its sisters without floats. Despite this limitation, a few C-47s equipped with the floats saw service in locations such as New Guinea, Alaska, and India.br /Today, the DC-3 on floats can be found sitting imposingly at the Greenville Municipal Airport. Though it hasn't flown in years, it was only recently put back on floats in 2020 and there are rumblings that the operator intends to return it to its former glory. If we are lucky, we just may see "Dumbo" splashing around the local lakes and hopefully attending the annual International Seaplane Fly-In at neighboring Moosehead Lake, a once familiar sight.br /Was an absolute pleasure walking around in the freezing cold and snow to capture photos of this iconic aircraft!
/images/icons/csMagGlass.png 中等 / 大图 / 全尺寸

Douglas DC-3 (N130Q)

提交时间:

Greenville is a town located in Piscataquis County, in the US state of Maine. It's situated at the southern end of Moosehead Lake, the largest lake in the state. Greenville is known for its scenic beauty and outdoor recreational opportunities, such as fishing, hunting, hiking, and wildlife watching...but did you know it's also home to an incredible one of a kind example of the iconic DC-3? Don't feel bad if you answered no - most don't.
During World War II, the US military needed an aircraft that could operate in a variety of environments, including areas without established airfields. In response to this need, the Edo Corporation designed and built a pair of twin, 1-ton floats that could be attached to a C-47. Each float was 42 feet long, five feet, eight inches wide, almost six feet high, and displaced 29,000 pounds of water. The cellular construction of each float had 14 separate water-tight compartments, and each float also had a 325 gallon fuel tank. The floats had fully retractable, hydraulic wheels, and could land on water, snow or land. The float rudders were connected to the air rudder, which allowed for control of the aircraft while in flight.
The DC-3A on floats located in Greenville, Maine is a rare example of this technology. The aircraft, which is registered as N130Q, was delivered to the US Army Air Forces in July of 1943 as a Douglas C-53D Skytrooper and served in a variety of roles before being converted back to a DC-3A standard and more notably, to a float plane by Dick Folsom in 1976. The floats used on the aircraft are the original Edo Corporation type, and the aircraft is believed to be the only Gooney Bird on floats left in existence.
While the floats allowed the DC-3 to operate in areas without established airfields, they also created a significant amount of drag and reduced the aircraft's speed. As a result, the aircraft was about 30 mph slower than its sisters without floats. Despite this limitation, a few C-47s equipped with the floats saw service in locations such as New Guinea, Alaska, and India.
Today, the DC-3 on floats can be found sitting imposingly at the Greenville Municipal Airport. Though it hasn't flown in years, it was only recently put back on floats in 2020 and there are rumblings that the operator intends to return it to its former glory. If we are lucky, we just may see "Dumbo" splashing around the local lakes and hopefully attending the annual International Seaplane Fly-In at neighboring Moosehead Lake, a once familiar sight.
Was an absolute pleasure walking around in the freezing cold and snow to capture photos of this iconic aircraft!

Comments

Please log in or register to post a comment.

动态日志
需要 N130Q 1998年以来的完整历史搜索吗? 现在购买,一小时内即可收到。
日期 机型 始发地 目的地 出发 到达 飞行时间
No Recent History Data
注册用户(注册免费而且快捷!)可以查看3 months的历史记录。 加入
 

登录

还没有帐户吗? 现在就注册(免费),设置诸多自定义功能、航班提醒等等!
您知道FlightAware航班跟踪是由广告支持吗?
通过允许展示来自FlightAware.com的广告,您可以帮助我们使FlightAware保持免费。我们努力使我们的广告保持相关性,同时不显突兀,以创造一流的体验。在FlightAware上将广告加入白名单快捷而简单,或者请您考虑选择我们的高级帐户.
退出