Several runway hold position signs are on the right rather than the left side of the taxiways.
747-400'S shall taxi at A speed of less than 10 mph on all non-restricted taxiways on the terminal side of the intersecting runways. Movement speed of not more than 5 mph is required when two 747-400'S pass or overtake each other on parallel taxiways A and B.
Noise sensitive airport; for noise abatement procedures contact airport noise office monday - friday 0800-1700 by calling 650-821-5100.
High speed taxiway (T) grooved full width between runway 28R and 28L.
Taxiway S2 between taxiway Z and taxiway S3 closed to aircraft with wingspan over than 215 ft.
Runway status lights in operations.
Runway 1L closed to departing trijet aircraft with wingspan greater than 155 ft.
Assc in use. Operate transponders with altitude reporting mode and ADS-B (if equipped) enabled on all airport surfaces.
Taxiway Z1 nbnd entrance closed to runway 10R for jet aircraft and four engine turboprops.
Simultaneous operations in effect all runways.
Flocks of birds feeding along shoreline adjacent to airport; on occasions fly across various parts of the airport.
All outbound taxiway yankee heavy aircraft with A wingspan of 171 ft. Or greater under power prohibited from entering westbound taxiway zulu.
Ramp closed to aircraft with wingspans over 117 ft at terminal 1, gate C41 indefinitely.
B747, B777, A330, A340 or larger aircraft are restricted from using taxiway A1 when B747-400, A340-600, or larger aircraft are holding short of runway 1R on taxiway A.
Runways 01L/19R, 01R/19L, 10R/28L, 10L/28R grooved full length except at runway intersections.
Personnel and equipment working approach end runways 28L, 28R, 19L indefinitely.
Airline pilots shall strictly follow the painted nose gear lines and no oversteering adjustment is permitted.
Runway 10 preferred runway between 0100-0600 weather and flight conditions permitting.
No grooving exists at airport runway intersections.